Paving and Concrete

Full-Service Pavement Installation

Perm-A-Seal’s paving crews are some of the best in the industry. Each of our paving professionals has been with us for over 20 years and is highly experienced in the installation, maintenance and repair of any asphalt surface. We can provide an estimate within two to five days. We’ll return your calls and emails on the same day itself. Get a personal touch with the services we offer.

Asphalt Paving

Asphalt is a reliable weather-resistant material and can be designed for low and high traffic conditions. It can withstand the harshest of weathers and the heaviest of semi-trailers. From small parking lot additions and commercial parking lots to sport surfaces, Perm-A-Seal can excavate, haul, grade, install rock, pave and then stripe your new parking lot.


Asphalt Patching

In the event that an area of your asphalt begins to fail, asphalt patching may need to be done. Removal and Replacement (R&R) of the failing area is the best method to repair your asphalt. R&R is the process of saw-cutting the perimeter of the patch. The asphalt is then removed down to the sub-base. One of the advantages of this method is that the sub-base can be inspected for failure. Once the sub-base is inspected and is determined to be safe, we install 3-4 inches of asphalt in two separate lifts. Each lift will be compacted. Promptly repairing areas before the damage spreads will save you money and add years to the life of your asphalt.

Asphalt Overlay

An asphalt overlay is a new layer of asphalt applied to a structurally sound (repaired as necessary) but worn and deteriorating surface. This application re-sets the pavement’s life. An overlay also levels depressions developed over time across the surface of the existing pavement. Edge milling should be performed in conjunction with an overlay whenever the pavement is bordered by concrete. This allows for a smooth transition between the concrete and the new layer of asphalt.

Asphalt Milling

Asphalt milling is the process of removing at least part of the surface of a paved area such as a road or parking lot. Milling removes anywhere from just enough thickness to level and smooth the surface to a full-depth removal. Milling is a much more cost-effective solution for repaving and cuts down on completion time considerably. Not all pavement projects fit the criteria for milling. Give one of our specialists a call to find out which method best fits your asphalt needs.

Pothole Repairs

Potholes are formed when water seeps into the pavement and the sub-base under the pavement through unsealed cracks in your asphalt. Due to our freeze-thaw cycle, the water will freeze and enlarge the crack or cracks and loosen the sub-base. When the ice under the pavement melts, the shifting in the pavement and sub-base will form a pothole. To ensure the proper repair of a pothole, our asphalt experts use the following materials:
  • Cold-mix asphalt is used to fill the potholes during the winter and early spring months
  • Hot-mix asphalt is used during late spring, summer, and fall seasons
  • Both the cold and hot mixes will be compacted tightly into the hole

Concrete Repairs

Perm-A-Seal offers a number of commercial concrete services such as:

  • Sidewalk installation and replacement
  • Curb repair and installation
  • Stamped concrete and coloring

Need more information about any of our services, Just call 708-333-3833 or contact us here.